To give you the best possible experience, this site uses cookies. Continuing to use aomlighting.co.uk you are consenting to our cookie policy.
Information

30W LED Driver with 12 Port JB4 Distributor

Sale 30W LED Driver with 12 Port JB4 Distributor

Free UK Shipping

On all orders over £120

Brand: SENSIO FURNITURE LIGHTING SOLUTIONS
Product Code: SE40526
Availability: Delivery 1 - 2 Days
£39.84 £28.98 Ex Tax: £24.15
Qty: Add to Cart

UK Lighting company with over 15 years experience in the manufacturer of high quality LED lighting to the kitchen, bedroom and bathroom market.

Delivery: Delivery is normally between 1 and 2 working days.

30W LED Driver with 12 Port JB4 Distributor

 

Use this driver with ORANGE colour coded products from the Sensio range.

This electronic LED converter is exclusively designed for LED products which are to be used indoors. The electronic converter has a switch mode power supply with 12VDC constant output voltage.

An electronic protection circuit switches off the electronic converter in case of short circuit or overload in the secondary circuit, overheat as well as open circuit. This convertor is a thermally protected device, the type of protection is automatic resetting. After removing the faults, the electronic LED converter is ready for operation again.

Important information for the installation:
The unit conforms to the directive 2004/108/EC for the electromagnetic compatibility and the low voltage directive 2006/108/EC.

  • The electronic converter can only be used with the LED lamps.
  • The electronic converter is only suitable for use in indoors. Protect the electronic converter against excessive heat (permissible operating temperature range –20 to +40 degrees celcius).
  • The loads indicated on the converter must neither exceed nor below the following values: 2-30W.
  • Connect the LED lamps to the electronic LED converter with correct polarity according to the schematic drawing.
  • The maximum length of the output cable to the LED lamps should not exceed 8m in order to meet the EMC standard.
  • If the electronic LED converter is used for purposes other than originally intended or it is connected in the wrong way, no liability can be taken over for possible damages.

Specifications:

Rated power: 30W
Minimum load: 2W
Voltage: 12V
Protection degree: IP20

Dimensions:

Length: 150mm
Width: 40mm
Depth: 31mm

Specifications
Dimensions Length: 150 mm Width: 40 mm Depth: 31 mm
Dimmable No
Finish White
IP Rating IP20
Max Wattage 30W
Name 30W LED Driver with 12 Port JB4 Distributor
Product Code SE40526
Type LED Driver
Warranty 1 Year
Voltage 12V
There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: