TEUCER 1 zone RF controller and receiver for tunable white LED strip

LR-TWN and R3C

1 zone RF controller and receiver for tunable white LED strip

• Features
  Seamlessly adjust the CCT of LED strips via the remote
• 2.4GHz wireless technology, enabling remote distance of up to 30m (obstacle free)
• Operates with an LED indicator light for ease of use.
• Each remote can control one or more receivers
• Control each zone separately or simultaneously
• PWM dimming enables flicker-less dimming
• Dimming range: 0-100%

Controller
Order code LR-TWN
Type RF Remote
Input Voltage 3VDC
Operation Frequency 2.4GHz
Dimension 58.5x107x9mm (WxLxH)
Power battery CR2032 

Receiver
Order code R3C
Type RF receiver
Input Voltage 12-24VDC
Current 3x4A
Output 144-288W
Note Constant voltage
Dimension 33x97x18mm (WxLxH)

Recommendation

RF technology allows for greater flexibility when it comes to controlling simple or complex lighting installations without the need of additional cabling. There are some limitations where installations have the receivers enclosed in electrical boxes or hidden away in a ceiling , reducing the RF signal strength and therefore the communication range. In order to overcome these RF Signal restrictions we suggest the following when synchronising our RF controllers and receivers:
• Keep the distance within 10 meters from the controller to the receiver. The remote can operate up to 30 meters if signal is uninterrupted by obstacles.
• When expanding your lighting, always try and use a signal repeater (PR-RGB), where possible.
• If your installation requires several RF receivers, ensure the “master” receiver is positioned in the middle.